NEIJIANG QINGLONG

How can I safely control a wire cutting machine?

Recently, there have been many customer feedbacks. Some of the masters in the online cutting machine maintenance found that they did not follow the normal process when manipulating the wire cutting machine, which led to accelerated wear of the wire cutting machine and some unnecessary work accidents. In this regard, China Machine Tool Business Network Xiaobian specially consulted the relevant person in charge of Suzhou Baoma CNC Equipment Co., Ltd. The following are some suggestions summarized. I hope that the majority of wire-cutting machine tool operators can do more work while at the same time Care for the company's wire cutting machine.


1. Power on: First turn on the AC power supply, then turn on the power switch, then turn on the high voltage switch, wait 5 minutes to connect with the negative line.


2. Trial operation: Check the output data of the regulated power supply and whether the digital tube of the xenon lamp is normal. Enter the information for 5 minutes. After the test operation is normal, the machine can be cut on the line.


3, wire cutting machine high-frequency power switch should be placed in the off position before processing, in the case of molybdenum wire operation, can open high-frequency power, and should be maintained at 60 ~ 80 volts. The high frequency power supply should be turned off before parking.


4. When processing the wire cutting machine, add coolant. When the molybdenum wire contacts the workpiece, check whether the voltage and electro-hydraulic value of the high-frequency power supply are normal, and do not process it under the condition of arcing.


5. It is forbidden to touch the wire or workpiece with your hand or conductor. It is also not allowed to touch the switch or other electrical parts with wet hands.


6. When the wire cutting machine fails, the high frequency power supply should be turned off immediately, and the reason should be analyzed. Other items, especially metal equipment, are not allowed in the electric box.