Pay attention to machine tool table maintenance and maintenance work

Machine table maintenance and repair work

1. In order to prevent the deformation of the machine table, four lifting holes are used to hang the four lengths of the same length of wire rope on the machine table, which will be hoisted smoothly on the vehicle.

2. The machine table support points are padded and leveled to ensure uniform force on each support point to ensure the stability of the entire work table.

3. When the machine tool table is installed, the support points are adjusted and lapped with the adjusting horns, and the professional technicians adjust to the qualified accuracy.

4. When using the machine table, gently handle the workpiece. Do not move the rough workpiece on the working surface to avoid bumping, scratching and other damage to the working surface.

5. In order to prevent the overall deformation of the workbench, after use, the workpiece should be taken off from the top to avoid deformation of the workpiece caused by heavy pressure for a long time.

6. When the machine table is not in use, it is necessary to wash the working surface in time, then apply a layer of anti-rust oil, and cover it with anti-rust paper. The outer packaging will be covered to prevent damage to the working surface. .

7. The machine tool table should be installed in a ventilated and dry environment, and away from heat sources, corrosive gases, and corrosive liquids.

8. The machine tool workbench shall carry out regular weekly inspection according to national standards. The verification period may be 6-12 months depending on the specific conditions.